Youtube Linkedin Facebook

Shop

Showing 1–16 of 298 results

  • CICT Mobile GSP3410S GNSS Simulator

    Support BDS/GPS/GLONASS/Galileo system full-frequency point open service signals, a single device to support any combination of frequency point signal output;

    High degree of equipment integration, all analog signal simulation is controlled by a simulation software, support for simulation mode and test mode two modes of operation;

    With carrier trajectory model simulation function, support external loading motion model file for trajectory simulation;

    With active timing and passive timing function, support internal frequency scale and external frequency scale automatic switching function;

    With signal open/close automatic control function, each channel can specify the signal to be closed for a certain period of time for a few seconds after opening, supporting the receiver to lose lock recapture test;

    Simulation control software display function, real-time display of user attitude, simulation time, user information, star view, navigation status and simulation operation log information.

     

     

    Read moreDone

  • CICT Mobile CTP3308EV Telematics LTE-V2X Comprehensive Tester

    Support List test mode, and chip cooperation, further enhance the efficiency of production test;

    Fully automatic PC5 signal T/RX test, CW and LTE signals can be used for frequency and power calibration, and support 10MHz & 20MHz receive sensitivity test;

    With 8 RF COM interfaces, interface visualization, can be independent dual-channel test;

    For some modules launched in the market, CTP3308EV can realize one-key automation test, which provides a powerful cooperation platform support and perfect end-to-end solution, laying a foundation for the industrialization of Telematics;

    Realize C-V2X to do AP layer network, security, message layer protocol conformance testing and laboratory V2V\V2I scenario simulation.

    Read moreDone

  • CICT Mobile SSA5010 C-V2X Sweep Analyzer

    Support background test data reporting, including: test location latitude and longitude, altitude, PC5 signal field strength, signal-to-noise ratio, channel occupancy, channel busy rate, received signal strength indication, delay information and other information;

    Spectrum scanning, spectrum scanning with 100M bandwidth, to assist in analyzing the anti-interference performance of V2X signals in the field;

    Leading domestic C-V2X outfield test solution, simultaneously supporting 4-span and new 4-span equipment testing;

    Supports multipath and Doppler testing, providing data support for channel modeling;

    With spectrum scanning function to assist interference detection and problem localization;

    Customized test service solutions and analysis reports for customers.

    Read moreDone

  • CICT Mobile Terminal signaling synthesizer CTP3515

    Has 8 RF ports and supports 8T4R;

    With 0.4~6GHz RF capability;

    Supporting 400MHz analysis bandwidth;

    Supporting 5G SA and NSA network architecture;

    Supporting multi-cells;

    Support conduction and OTA testing;

    Supporting flexible setting of L1/L2/L3/NAS parameters;

    Supporting monitoring of key indicators such as Tput, bler, RB and MCS;

    Supporting multi-user services and simulating the real environment of 5G commercial network;

    Supporting DL 4×4 MIMO, UL 2×2 MIMO;

    Supporting automated use case testing and management;

    Support mmV evolution, support NR V2X evolution.

    Read moreDone

  • CICT Mobile Terminal Production Synthesizer 3308F

    Cellular and non-cellular one-stop testing;

    Support 5G NR, LTE (including LTE-Cat1), WCDMA, CDMA2000, TD-SCDMA, GSM, NB-IoT, StarFlash New Short Range, WIFI (a/b/g/n/ac/ax), Bluetooth (4.0/4.2/5.0), GPS, Beidou;

    Support MultiChannel to improve the efficiency of meter trial;

    Faster test speed, higher test accuracy;

    Downstream 8 ports support broadcasting;

    1U architecture, 6.5kg, convenient for production line stacking;

    Size: 351(W)*44(H)*388(D)mm;

    Built-in multiple cooling fans for better heat dissipation treatment and high tolerance to ambient temperature.

    Read moreDone

  • CICT Mobile Terminal Production Synthesizer 3308E

    Expandable universal platform supporting TDD-LTE, FDD-LTE, Cat1, NB-IoT, WCDMA, TD-SCDMA, CDMA2000, GSM, Bluetooth, WIFI, GPS and other communication standards;

    Dual-channel parallel testing, can parallel tor 2 terminals at the same time;

    Fast measurement characteristics;

    Support including ping-pong testing, support for one tow four, improve production testing efficiency;

    GPIB/LAN remote control;

    Covering a variety of chips such as Qualcomm, MTK, Hesi, Spreadtrum, ASR, Hengxuan and so on.

    Read moreDone

  • CICT Mobile Terminal R&D + Production IMD 3308C

    Scalable and versatile platform supporting TDD-LTE, FDD-LTE, WCDMA, TD-SCDMA, GSM and other communication standards;

    Dual-channel parallel testing;

    System emulator for each standard and built-in fading channel emulator;

    Extensive and fast inter-cell switching test;

    Optional automation software;

    Fast measurement features;

    Support for one-stop testing of multiple terminals including ping-pong testing;

    GPIB/LAN remote control;

    Covering a wide range of chips such as Qualcomm, MTK, Hesi, Spreadtrum, ASR and others.

    Read moreDone

  • CICT Mobile CTP3500

    A single meter can support NR TDD two-cell and FDD four-cell;

    Support meter cascade, the maximum can support TDD four cells;

    Supporting upstream and downstream peak throughput test, supporting 256QAM;

    Support upstream and downstream carrier aggregation;

    Supports R15 and R16 protocol versions, and supports smooth evolution of subsequent versions;

    Support 450 MHz – 6000 MHz FR1 frequency range, can support 100MHz continuous bandwidth of single carrier at any starting point in the band;

    Extendable to support 400 MHz continuous bandwidth of single carrier at any starting point within the NR FR2 frequency band;

    Support terminal OTA test;

    Support automated execution of use cases and judgment of results;

    Support customized development of test cases.

    Read moreDone

  • CICT Mobile Mining explosion-proof and intrinsically safe signal converter

    Support 5G N1/N28/N78/N79 frequency band;

    Rated input AC voltage is: AC127V (75%~110%), 1.5A, overall power consumption: ≤15W;

    Overall dimensions (L*W*H): 448mm x 424mm x 200mm;

    Weight: ≤40kg;

    Mining explosion-proof and intrinsically safe type, explosion-proof mark is Ex d [ib] I Mb.

    Read moreDone

  • CICT Mobile 5G Vehicle-to-Ground Communication TAU Product (DT-5130)

    Supports 5G NR n1,n2,n3,n5,n7,n8,n12,n20,n25,n28,n40,n41,n66,n71,n77,n78,n79;

    Support 4T4R, transmit power 23dBm or 33dBm;

    Support External antenna, N-type female*4; 10/100/1000M adaptive, Qty 4, M12-A type connector; 1 channel, external, push-pop USIM card slot; 1 channel, built-in USIM chip; (choose one of the two); Built-in TF card interface, Qty 1; Built-in mSATA, Qty 1;

    RS232 1 channel, external; RS485/422 1 channel, external;

    DC 110V, M12-D type connector; Maximum power consumption ≤ 20W;

    EMC in line with “Railway facilities . Electromagnetic compatibility . Part 3-1: Railway Vehicles . Trains and complete vehicles” requirements of the EN 50121-2017 standard;

    Vibration Conforms to IEC 61373-2010 standard as required by “Shock Vibration Test for Rolling Stock Equipment in Railway Facilities”;

    Environment Conformity with EN 50155-2017 as required by “Railway installations Electronic equipment for railroad vehicles”;

    Fire protection Conforms to EN 45545-2 as required by “Fire protection of railroad vehicles – Part 2 Fire requirements for materials and components”.

    Read moreDone

  • CICT Mobile 5G-R vehicle-mounted wireless digital transmission terminal product (DT-5120)

    Support 5G-R band, channel number 1T2R/2T2R, maximum transmit power 33dBm;

    Support GSM-R frequency band, the number of channels 1T1R , the maximum transmit power 25dBm;

    Support 5G-R/GSM-R band, external antenna SMA type female 3; 10/100/1000M adaptive, number 2, professional aviation plug connector; 1 channel built-in USIM chip; built-in mSATA;

    DC 110V;

    Operating temperature -20-70℃.

    Read moreDone

  • CICT Mobile 4G/5G Industrial Wireless Airborne/Vehicle-mounted Gateway Product (DT-5110)

    Supports 5G NR band , 4G dedicated network band (UHF, 1447-1467MHz, 1785-1805MHz);;

    Support 4T4R for 5G NR, 1T2R for 4G band, transmit power 23dBm or 37dBm.

    Support external antenna SMA type female 4pcs; 10/100/1000M adaptive, quantity 2pcs, professional aviation plug connector; 1 way or 2 way external, push-pop USIM card slot; 1 way built-in USIM chip; (two choose one); external TF card interface, quantity 1pcs; RS232 1 way, external; RS485/422 1 way, external;

    Weight ~850g ;

    DC 9-36V, professional aviation plug connector; Maximum power consumption ≤ 10W;

    Operating temperature -40-70℃; Protection level IP65.

    Read moreDone

  • CICT Mobile 4G Car TAU product (TLC200T)

    Support TD-LTE 1447-1467MHz, 1785-1805MHz, 1T2R, transmit power 23dBm or 33dBm;

    Support External antenna, N-type female *2; 10/100/1000M adaptive, quantity 4, M12-A type connector; 1 channel external, push-pop USIM card slot; 1 channel built-in USIM chip; (choose one of the two); built-in TF card interface, quantity 1; built-in mSATA, quantity 1; RS232 1 channel, external; RS485/422 1 channel, external;

    DC 110V, M12-D type connector; Maximum power consumption ≤ 20W;

    EMC complies with “Railway Facilities. Electromagnetic compatibility . Part 3-1: Railway Vehicles . Trains and complete vehicles” requirements of the EN 50121-2017 standard;

    Vibration Conforms to IEC 61373-2010 standard as required by “Shock Vibration Test for Rolling Stock Equipment in Railway Facilities”;

    Environment Conformity with EN 50155-2017 as required by “Railway installations Electronic equipment for railroad vehicles”;

    Fire protection Conforms to EN 45545-2 as required by “Fire protection of railroad vehicles – Part 2 Fire requirements for materials and components”.

    Read moreDone

  • CICT Mobile 5G Industrial Grade Wireless Digital Transmission Terminal Product (DT-5100)

    5G high-speed transmission: the product supports 5G NSA/SA;

    Rich professional interfaces: 4 GE ports, 1 RS232 serial port, 1 RS485 serial port, 2 relay interfaces, 2 I/O , 1 external Micro SD card interface, support for GPS, to meet a variety of mainstream data access needs;

    High reliability: adopts software watchdog and hardware watchdog double protection, provides multi-level link detection mechanism and automatic fault recovery mechanism;

    High security: supports VPN functions such as GRE, L2GRE, PPTP, L2TP and IPSec. Supports built-in USIM card chip;

    Functional versatility: basic functions such as routing management, configuration import and export, firewall, Layer 2 routing and switching, NAT, port mapping, DMZ, DHCP, rate charts, and network status monitoring;

    Easy maintenance: support one-key reset; support SD card diagnosis; support SNMP, TR069 protocol and customized protocol network management software; can support remote automatic software upgrade, no need to replace the hardware, no need to manually operate the terminal, you can add new features.

    Read moreDone

  • CICT Mobile 5G Wireless Router CPE (F-NR100)

    Support 5G NR4T4R; Support WIFI, 2T2R;

    Support 1 WAN port, 4 LAN ports, 1 RS232/RS485, external USIM card and TF memory card;

    Support local and remote management and upgrade;

    Support VLAN, TCP, UDP, APN, UPDN and other protocols.

    Read moreDone

  • CICT Mobile 4G Outdoor CPE Data Terminal (E57002)

    High-speed wireless transmission: the product is based on 4G TD-LTE international standard, 1T2R, maximum transmit power 37dBm, support the maximum transmission rate of DL: 100Mbps, UL: 50Mbps, support for 2 × 2 dual-antenna MIMO technology; WiFi support for 2R × 2T, the maximum transmission rate of 300Mbps;

    High adaptability: IP65 protection level, -40-70℃ working temperature, capable of outdoor harsh working environment;

    High reliability: dual protection with software watchdog and hardware watchdog, providing multi-level link detection mechanism and automatic fault recovery mechanism; supports built-in USIM card chip;

    High security: support GRE, IPIP, PPTP, L2TP and IPsec VPN functions;

    Functional versatility: basic functions such as route management, configuration import and export, dynamic domain name resolution, firewall, Layer 2 routing and switching, NAT, PAT, DMZ, DHCP, multi-IP settings, link backup and network status monitoring;

    Efficient use: traffic management technology and bandwidth intelligent allocation technology; support for SNMP protocol and customized protocol network management software, one-key reset; device configuration-free;

    Easy to maintain: can support remote automatic software upgrade, no need to replace hardware, no need to manually operate the terminal, you can add new features.

    Read moreDone

Products

Telecom Equipment

Test and Measurement Equipment

Base Station

Microwave

Who We Serve

OEMS

Customers

Registration

Why Vita

About Us

Solutions

Recommended

News & Blogs

Contact Us

Facebook Linkedin Youtube